A Step-by-Step Guide to Painting Plaster Walls with Toskie

Painting plaster walls can transform a room, but it requires careful preparation for a smooth, lasting finish. Here’s a concise guide to help you through the process.

Step 1: Preparing the Surface
Start by cleaning the walls with a mild detergent and warm water to remove dust and grime. Rinse with clean water and let the walls dry. Next, inspect for cracks or holes. Use plaster patching compound to fill any imperfections, then sand the patched areas smooth. If you notice moisture issues, treat them immediately, especially if mold is present.

Step 2: Sanding
Sanding helps smooth out the surface for better paint adhesion. Use fine-grit sandpaper (220-grit) and gently sand the walls, focusing on repaired areas. Clean up the dust with a vacuum or damp cloth.

Step 3: Priming
Apply a bonding primer, ideally water-based, to ensure better paint adhesion. A mildew-resistant primer is ideal for damp areas. Allow the primer to dry completely before moving on.

Step 4: Choosing the Right Paint
Opt for latex paint with a matte or eggshell finish. High-quality paint ensures durability and even coverage. Test the color in a small area before committing to the whole wall.

Step 5: Painting
Use a roller for large sections and a brush for edges and corners. Apply multiple coats, allowing each to dry thoroughly.

With proper prep and technique, your plaster walls will look flawless and last for years. For a professional touch, consider hiring expert painters through Toskie.