Proper maintenance is the key to extending the service life of organic fertilizer equipment. The following are some specific maintenance methods and suggestions to ensure the long-term stable operation of the equipment:

Regular inspection and maintenance: Regularly inspect the key components of the equipment, such as motors, bearings, gears, chains, etc., to ensure they are in good operating condition. Replace worn or damaged parts in time to avoid equipment shutdown due to component failure. Regularly add lubricating oil to the moving parts of the equipment to reduce friction and wear.

2. Optimize operation procedures: Ensure that operators are familiar with the operation norms and maintenance knowledge of the equipment, and strictly follow the operation procedures to avoid equipment damage caused by improper operation. Control the operating parameters of the equipment, such as rotational speed, temperature and humidity, reasonably according to the production requirements to avoid overloading the equipment.

3. Preventive maintenance: Develop a detailed maintenance plan for the organic fertilizer production line and conduct regular preventive maintenance to reduce the occurrence of equipment failures. Prepare necessary spare parts to ensure that the equipment can be replaced quickly in case of failure and reduce downtime.

4. Employee Training: Regularly provide skills training to operators to enhance their ability to operate and maintain equipment. Strengthen the safety awareness education of employees to ensure that operators strictly abide by safety regulations during the operation process.

5. Equipment upgrade and optimization: Regularly assess the technical level of the equipment, and carry out technical upgrades and optimizations in a timely manner to enhance the performance and efficiency of the equipment.

Through the above measures, the service life of organic fertilizer equipment can be effectively prolonged, production efficiency can be improved, main

To ensure the normal operation of the disc granulator and extend its service life, the daily maintenance of the bearings is of vital importance. The following are some specific maintenance methods and suggestions:

1. Regularly check the bearing temperature: During the operation of the equipment, regularly check the temperature of the bearings. If the temperature of the bearing rises abnormally, it may be a sign of insufficient lubrication or bearing wear.

2. Lubrication and maintenance: Lubricating oil should be added or replaced regularly for the bearings to ensure good lubrication. Ensure its quality is reliable and meets the usage requirements of organic fertilizer equipment. Determine all the parts that need lubrication and clean up oil stains and impurities before lubrication.

3. Cleaning and Maintenance: Regularly clean the debris and dust around the bearings to prevent impurities from entering the bearings and affecting the lubrication effect. Regularly check the wear condition of the bearings. If severe wear is found, they should be replaced in time.

4. Check the bearing clearance: Regularly inspect and adjust the bearing clearance to ensure it is within the normal range. Excessive or insufficient clearance may cause the equipment to operate unstably.

5. Inspection before equipment operation: Before starting the equipment, check whether an appropriate amount of lubricating oil has been injected into each lubrication point to ensure that the equipment operates in a good lubricated state.

6. Abnormal situation handling: If abnormal noise or vibration is detected during operation, the machine should be stopped immediately for inspection, to identify the cause and eliminate the fault. If the temperature of the bearing rises abnormally, the machine should be stopped immediately for inspection, and lubricating oil should be replenished or worn parts replaced.

Through the above daily maintenance measures, the service life of the bearings of the disc granulat